Skip to specifications
CBB4-B CBB 4 burner BBQ grill / cast stainless steel burner
CBB4-B

Built-in grills & grill heads ↗

CBB4-B

CBB 4 burner BBQ grill / cast stainless steel burner

CBB4-B — CBB 4 burner BBQ grill / cast stainless steel burner. Cooking dimensions: 804 × 479 mm; Combined output: 75,000 BTU; Overall dimensions: 862.8 × 707.5 × 629.5 mm; Packing dimensions: 940 × 745 × 760 mm; Container loading quantity: 108 UNITS/40HQ. Overall size is not an installation cut-out. Ask HAN DING to check the applicable drawing, gas configuration and available market documents for the exact model and destination country.

4burners
34 innominal size

Select several models and enquire about them together.

Request a quotationRequest further specifications
View model detailsBuying guides

The model, in detail.

Review the listed details, then ask about any additional requirements.

Dimension units
CBB4-B specifications
ModelCBB4-B
Nominal size34 inches
Main burner output15,000 BTU × 4
Rear burner output15,000 BTU
Combined output75,000 BTU
Cooking dimensions804 × 479 mm
Cooking area0.385m²
Warming rack dimensions796 × 171 mm
Main burner materialCast stainless steel
Overall dimensions862.8 × 707.5 × 629.5 mm
Packing dimensions940 × 745 × 760 mm
Container loading quantity108 UNITS/40HQ

Dimensions retain their stated sequence. Inch conversions marked ≈ are approximate. Product dimensions are not installation cut-outs; confirm cut-outs and clearances with an approved drawing.

Need a detail that is not listed?Request model information

Your model pack

Start with the listed data. Confirm the configuration and current documents before approving a sample or installation.

CBB4-B

Listed catalog data

Combined output
75,000 BTU
Overall dimensions
862.8 × 707.5 × 629.5 mm
Packing dimensions
940 × 745 × 760 mm

Uses your metric/inch preference. ≈ marks approximate conversions; product dimensions are not cutout dimensions.

View all listed specifications

Agree the supply scope item by item.

What’s included

Request the itemised supply list for your selected configuration.

Options

Confirm available options, compatibility and separate pricing before ordering.

Documents to review

  • Technical specification

    Catalog values listed

    Confirm the current specification version and component materials.

  • Installation drawing

    Drawing confirmation required

    Request the model’s cutout, clearances, ventilation and fixing details.

  • Fuel & market documents

    Destination review required

    Confirm the gas type, pressure and certificates covering the exact model and configuration.

  • Packing & handling

    Packing size listed

    Confirm the box count, weights, protection and order-specific packing list.

Request this model pack

The inquiry carries this model. Tell us your destination market and the files you need.

CBB4-B / Technical Q&A

Your technical questions, answered.

Start with the listed model data, then confirm the details for your configuration and destination.

Request documents for a model

What cooking space and burner output does CBB4-B offer?

CBB4-B — Main burners: 4; Cooking dimensions: 804 × 479 mm; Main burner output: 15,000 BTU × 4; Rear burner output: 15,000 BTU; Combined output: 75,000 BTU; Cooking area: 0.385m². These are the listed specifications for this model; they do not establish cooking speed or fuel efficiency.

Main burners
4
Cooking dimensions
804 × 479 mm
Main burner output
15,000 BTU × 4
Rear burner output
15,000 BTU
Combined output
75,000 BTU
Cooking area
0.385m²

What are the dimensions of CBB4-B, and are they installation cut-outs?

CBB4-B — Overall dimensions: 862.8 × 707.5 × 629.5 mm. Product dimensions are not installation cut-outs. Confirm the opening, clearances, ventilation and service access against an approved drawing for the selected configuration, with a qualified installer.

Overall dimensions
862.8 × 707.5 × 629.5 mm

Which component materials are specified for CBB4-B?

CBB4-B — Main burner material: Cast stainless steel. These descriptions apply only to the named components. Confirm grades, finishes and the remaining components for the proposed configuration.

Main burner material
Cast stainless steel

What packing details are listed for CBB4-B?

CBB4-B — Packing dimensions: 940 × 745 × 760 mm; Container loading quantity: 108 UNITS/40HQ. Confirm the final package, protection and shipping arrangement for your order. The listed container quantity is a loading reference, not a minimum order quantity or a confirmed shipping plan.

Packing dimensions
940 × 745 × 760 mm
Container loading quantity
108 UNITS/40HQ

Can CBB4-B replace a grill in an existing island?

Use CBB4-B as a candidate for a fit review. Send the existing appliance reference, measured opening and site photographs, then request the installation drawing for the proposed configuration. A qualified installer should confirm clearances, ventilation, connections and removal access before you agree to a replacement.

How should CBB4-B be specified for the planned kitchen?

CBB4-B — This is a built-in grill selection. Compare the cooking space with the grill body dimensions, then obtain the opening, support, lid clearance and service-access drawing for the actual island. A cabinet-grill footprint is not a substitute for that drawing.

How is the stated total output of CBB4-B composed?

CBB4-B: 60,000 + 15,000 = 75,000 BTU. The calculation uses the listed main-burner quantity and the listed rear and side outputs where present. It describes the whole listed burner configuration, not the output delivered only to the main cooking surface. Compare cooking dimensions and individual burner outputs as separate fields.

How should the cooking layout of CBB4-B be read?

CBB4-B — Warming rack dimensions: 796 × 171 mm. The warming rack is a separately listed component; its dimensions should not be added to the main cooking area as though both surfaces have the same purpose.

Warming rack dimensions
796 × 171 mm

Is the nominal size of CBB4-B its installation width?

CBB4-B — Nominal size: 34 inches. The nominal inch size is a product size class. Use the separately listed cooking and overall dimensions for comparison, and an approved installation drawing for the cut-out. A change of display units does not turn the nominal size into a verified opening dimension.

Nominal size
34 inches

Which models should be compared with CBB4-B, and why?

CBB4-B (CBB 4 burner BBQ grill / cast stainless steel burner) — Cooking dimensions: 804 × 479 mm; Side burner output: not listed; Overall dimensions: 862.8 × 707.5 × 629.5 mm. CBB4 (CBB 4 burner BBQ grill / cast stainless steel burner) — Cooking dimensions: 804 × 479 mm; Side burner output: not listed; Overall dimensions: 862.8 × 707.5 × 629.5 mm. CBU-601N-B (CBU 6-Burner Built-In Gas Grill) — Cooking dimensions: 960 × 429 mm; Side burner output: N/A; Overall dimensions: 1101 × 612 × 552 mm. These are same-category comparison candidates, not a performance ranking or a compatibility approval. Compare the listed values, then resolve the missing configuration details before substituting a model.

Which market and certification documents should be checked for CBB4-B?

For CBB4-B, confirm the required documentation for the destination country and exact configuration. Check the document number, holder, covered model and configuration, applicable market and current validity before an order. Available documents and their scope are reviewed for the proposed project.

What should an OEM inquiry for CBB4-B include?

Include CBB4-B, the destination country, estimated quantity and your branding, packaging or configuration requirements. Add drawings or reference links when available. Customization scope, minimum order, sample terms and lead time are confirmed for the proposed order.

For your market & your order

Make it fit your brief.

Share your destination market and requirements so the proposed configuration can be reviewed for your inquiry.

Request a quotation

Gas & destination market

Tell us the destination, gas type and any operating-pressure or documentation requirements.

Installation & materials

Confirm cut-outs, clearances and component materials for the intended installation.

Your brand & order

Share branding, packaging, estimated quantity and your target schedule.